Proton Exora
#721
Posted 04 December 2012 - 09:44 PM
How much will the price drop per year?
To much headache with my EB
#722
Posted 10 December 2012 - 11:12 PM
True enough after heavy rain, headlight got water vapour inside.
Now need to take another leave. what a waste. service men is not competent or just plain stupid
headlight got vapour, u just have to take photo and show them.. they will straight away replace a new unit for u...
#723
Posted 14 December 2012 - 02:59 PM
Already replaced on 7 Dec 2012 at COE.
No question ask after showing them the photo.
Replaced rear LED module also.
The bad thing was that they did not re-install the bumper properly at the side, some gap between bumper and fender.
Already dismantled bumper and adjusted last weekend.
Also saw a lot of EB with brake light problem, either dim or not functioning, even new one.
Wonder why this still happen. Should have taken corrective action by now.
#724
Posted 13 September 2013 - 05:26 PM
No question ask after showing them the photo.
Replaced rear LED module also.
The bad thing was that they did not re-install the bumper properly at the side, some gap between bumper and fender.
Already dismantled bumper and adjusted last weekend.
Also saw a lot of EB with brake light problem, either dim or not functioning, even new one.
Wonder why this still happen. Should have taken corrective action by now.
boss, i claim 3 biji rear light alr... u say ler??
#725
Posted 01 October 2013 - 06:21 PM
#726
Posted 03 October 2013 - 11:16 AM
If proper Wiring is done, there shouldn't be any issues.
You will be taking the connection from the existing Brake lights only....
I've fitted and there is no issues....
Since you are tapping the wire, just ensure that Proton SC does not see that....
#727
Posted 25 December 2013 - 06:28 PM
a little off topic here
can you suggest any front disc pad for EB.
the oem has gone half life at just 30k km in millage.
heard that the oem is so expensive somehow the braking power of EB is good, i cannot justife weather the oem pad really is good, since i also think that the braking system in EB is very good.
therefore i plan to get a good quality of pads with budget in mine.
#728
Posted 03 February 2014 - 08:33 PM
can you suggest any front disc pad for EB.
the oem has gone half life at just 30k km in millage.
heard that the oem is so expensive somehow the braking power of EB is good, i cannot justife weather the oem pad really is good, since i also think that the braking system in EB is very good.
therefore i plan to get a good quality of pads with budget in mine.
Try out Trestor Blue Advantage....
#729
Posted 04 February 2014 - 03:43 PM
ive just ter-took CX-OZ GRUN DYNAMIK its ceramic , quite ok.
#730
Posted 04 February 2014 - 10:30 PM
that brand is not bad.
ive used it my blm.box has green black colour rite?
sufficient for normal and average driving.
hard core downhill on bukit putus,brake will fade half way.
plus point are it wears the rotor evenly and it bites from cold.
now blm is using trestor and it took some time to build up temp before full force can be used.