Posted 19 September 2012 - 10:37 PM
Thx bro, I'm sure it will be quite bright when lite-up. I'm thinking of doing the same at the front plus the 4 doors (Red LED) so that when doors are open, it would be noticeable at night.. Since you have 4 more extra, you can try DIY that to your door.
too much will become beng beng car alr..
Posted 25 September 2012 - 07:38 PM
rewlz
Probation
-
-
Members
-
-
31 posts
To sifu out there.
Anyone knows how to remove the front and back chrome molding or garnish?
Any help is appreciated.
Eratic idling still there.
Aircond belt making more noise
Posted 27 September 2012 - 09:30 AM
To sifu out there.
Anyone knows how to remove the front and back chrome molding or garnish?
Any help is appreciated.
Eratic idling still there.
Aircond belt making more noise
why u want to remove it? i only know how to remove rear chrome pedang only. For front, as i know it is built together with front bumper.
#694
Nabworld
Posted 27 September 2012 - 11:58 AM
jus use black tape to cover it...
Posted 27 September 2012 - 03:06 PM
rewlz
Probation
-
-
Members
-
-
31 posts
Front one need to be replaced minor accident. I saw that the chrome thing is actually hold in place with brackets and these bracket goes into the holes at the grille of the bumper. Look like need to take off the bumpur else cannot reach at the backside of the chrome thing.
Since touch-up the front bumper might as weel paint the back chrome thing also.
why u want to remove it? i only know how to remove rear chrome pedang only. For front, as i know it is built together with front bumper.
Posted 27 September 2012 - 03:10 PM
Front one need to be replaced minor accident. I saw that the chrome thing is actually hold in place with brackets and these bracket goes into the holes at the grille of the bumper. Look like need to take off the bumpur else cannot reach at the backside of the chrome thing.
Since touch-up the front bumper might as weel paint the back chrome thing also.
ya, front have to take out the bumper... when i add 2 additional bm horn, also take out whole bumper..
Posted 27 September 2012 - 06:14 PM
rewlz
Probation
-
-
Members
-
-
31 posts
Bro ntc,
Can u describe how to remove the front bumper.
Afraid of breaking something.
Last time when i accidently fly over a bumper, the side bumper where it lock with the side panel came off.
Thank you sifu.
Need to go to service center and complain some more on aircond belt making noise.
Normal wear and tear they said and just spray with lubricant.
ya, front have to take out the bumper... when i add 2 additional bm horn, also take out whole bumper..
Posted 27 September 2012 - 06:50 PM
Bro ntc,
Can u describe how to remove the front bumper.
Afraid of breaking something.
Last time when i accidently fly over a bumper, the side bumper where it lock with the side panel came off.
Thank you sifu.
Need to go to service center and complain some more on aircond belt making noise.
Normal wear and tear they said and just spray with lubricant.
have to take out all the clips and screw. some of the clips quite tight as well... I forget whether the grille can open or not, but i know when taken down, it is(chrome grille) attached together with bumper.
i also do some main-main sound proofing with insuflex...
#699
coolridez
Posted 27 September 2012 - 11:02 PM
coolridez
Driver
-
-
Members
-
-
35 posts
have to take out all the clips and screw. some of the clips quite tight as well... I forget whether the grille can open or not, but i know when taken down, it is(chrome grille) attached together with bumper.
i also do some main-main sound proofing with insuflex...
Hmm... interesting.. I seen KL Auto did sound proofing for their customer on the 4 wheel plastic arch by painting a few layer with some sort of material on it (grey color). I haven't take that package yet.. It cost u about RM700~800.. I only done the comfort package + front A pillar + Boot lid.. Btw, how's your result?? It supposed to reduce the tyre noise. I just feel that our EB wheel arch are pretty small in size, not fully covered like other cars.
Posted 29 September 2012 - 04:53 PM
Does anyone know how to replace the bulb of the tail lamp indicator? There are 2 screws, but how to unplug the whole tail lamp. Perhaps, some pictures will help. Thanks.
