Sti Ver.10 Vs Evo X
#1
Posted 28 March 2015 - 06:38 PM
Subaru Impreza WRX STI Ver.10 Sedan A-Line: RM179,000 (2010 Unreg)
Mitsubishi Lancer Evolution X SST: RM 181,000 (2010 Unreg)
My budget is not exceeding 200K.
Thank you for your kind advice.
#2
Posted 28 March 2015 - 07:50 PM
Subaru Impreza WRX STI Ver.10 Sedan A-Line: RM179,000 (2010 Unreg)
Mitsubishi Lancer Evolution X SST: RM 181,000 (2010 Unreg)
My budget is not exceeding 200K.
Thank you for your kind advice.
You should read more on the cars first then go for test drive and see which you prefer. Subaru is still on the flat 4 boxer engine and Evo X on the inline 4. Both have pros and cons, just have to see which you prefer.
#3
Posted 28 March 2015 - 11:29 PM
#4
Posted 29 March 2015 - 09:23 AM
Well, as far as I know, any gb has it's limit. If come standard should not have any problem. If you are doing mod to increase the engine power, find out what the gb is capable off first.
Can't remember which version of the scooby, but there is one even the manual gb will break down if over it's limit.
Then for eg. Exora CFE turbo, seems the engine tune for torque but just within the gb max. Have seen some mod the engine for more power and torque over the gb max, and still using them without problem. Guess sometimes it is luck too....
#5
Posted 29 March 2015 - 10:11 AM
a-line still a conventional autobox..
sst is automated manual is not mistaken...
but still when pushed to limit...sst still do have problems of its own...not to mention the ayc as well..
i would say any car u choose better go with manual box.. (both offered in 6mt)
*crazy drifter|| http://img225.images...gilalahlagi.jpg
*Drift King is Back!!|| http://img580.images...ahdkterbaik.jpg
(NFS Underground)
#6
Posted 29 March 2015 - 11:33 AM
#7
Posted 31 March 2015 - 05:21 PM
common rule of thumb...any car get copycatted will easier to source parts...
means since evo x,inspira,lancer gt,4g63 all share certain common parts....(and famous) so most shop do keep stock of major parts....
like scooby since there is no proton/perodua twins...so most major parts were exclusive for scooby only..hence less shop stocking their part....
but i still choose scooby anyday...and most important things...it was manual box...
*crazy drifter|| http://img225.images...gilalahlagi.jpg
*Drift King is Back!!|| http://img580.images...ahdkterbaik.jpg
(NFS Underground)
#8
Posted 01 April 2015 - 07:44 AM
means since evo x,inspira,lancer gt,4g63 all share certain common parts....(and famous) so most shop do keep stock of major parts....
like scooby since there is no proton/perodua twins...so most major parts were exclusive for scooby only..hence less shop stocking their part....
but i still choose scooby anyday...and most important things...it was manual box...
Evo X is 4B11T, does it share the same parts as 4G63T?
#9
Posted 14 April 2015 - 11:07 AM
due to nature evoX=inspira...
some parts.. not specific on engine parts only usually interchangeable...
like steering linkage or other bodyparts in general....
*crazy drifter|| http://img225.images...gilalahlagi.jpg
*Drift King is Back!!|| http://img580.images...ahdkterbaik.jpg
(NFS Underground)
#10
Posted 14 April 2015 - 01:13 PM
some parts.. not specific on engine parts only usually interchangeable...
like steering linkage or other bodyparts in general....
So for engine do transplant.....hhahhahahha