City Maniac
just got call from this guy from Alpine speed name Janson confirm
their dont have any thing for V/S40 but their do have other Volvo
model poly bush ( Turbo lim also order from him )
and also have this Universe poly engine mount ( only 1 piece , the
main mountig ) that can install at any car and ask me to show him
our V/S40 original mount to justify the size, will bring one to see he
and up date you guy on later days.
Close

V40 Front Shock Absorber
Started by
V406198
, Mar 11 2005 11:13 AM, 35 replies to this topic
#32
Posted 11 April 2005 - 09:29 PM
I already changed my engine mountings when I bought the car. Now all the
rest of the bushings( not sure how many there r and where) as well. Did
changed my left tie-rod and a few bushings there along, and the feel was
amazing after the changes. A week later....back to the old self,
vibrating....:)
rest of the bushings( not sure how many there r and where) as well. Did
changed my left tie-rod and a few bushings there along, and the feel was
amazing after the changes. A week later....back to the old self,
vibrating....:)
#33
Posted 12 April 2005 - 09:44 AM
Hi V406198,
Universe poly engine mount cost how much? I heard Turbo Lim say v/s40
only can change 1 mounting too. If there is no much different from
original, maybe go for try since the Mounting cost couple of hundred n
the most expensive wan, over 500. Altogether 4 pieces.
Universe poly engine mount cost how much? I heard Turbo Lim say v/s40
only can change 1 mounting too. If there is no much different from
original, maybe go for try since the Mounting cost couple of hundred n
the most expensive wan, over 500. Altogether 4 pieces.
#34
Posted 12 April 2005 - 10:25 AM
City Maniac
they told me is about rm +-300 for 1 piece of main engine poly
mounting as the original one is rm 420 per piece, so is very good buy
if the poly mount is last longer that original one, if Turbo Lim said it
can replace one only this mean the universe poly mount are fit in to
our V/S 40 , but i will confirm with the Janson guy first
For me, i just replaced my no long ago so will keep this for my future
replacement.
they told me is about rm +-300 for 1 piece of main engine poly
mounting as the original one is rm 420 per piece, so is very good buy
if the poly mount is last longer that original one, if Turbo Lim said it
can replace one only this mean the universe poly mount are fit in to
our V/S 40 , but i will confirm with the Janson guy first
For me, i just replaced my no long ago so will keep this for my future
replacement.
#35
Posted 12 April 2005 - 10:58 AM
Good news, V406198,
Can gip the full address for this Janson speed? As I think sooner or
later, I'll need that again..
Can gip the full address for this Janson speed? As I think sooner or
later, I'll need that again..

#36
Posted 12 April 2005 - 02:26 PM
City Maniac
this guy name Janson from Apine Speed Motorsport, the address
and contact no is on the wed site that given by you early. .. mmmm
no..no ... they had move to new address some where near the
shops opposite Belakong mine wonderland ( the shop is at last roll
from mine wonderland and facing the field ) but the contact no still
unchange,
this guy name Janson from Apine Speed Motorsport, the address
and contact no is on the wed site that given by you early. .. mmmm
no..no ... they had move to new address some where near the
shops opposite Belakong mine wonderland ( the shop is at last roll
from mine wonderland and facing the field ) but the contact no still
unchange,