Finishing Glaze
Deep Gloss Paint Sealant
I don't know how to write a review so I'll give some comments.
I used a dual action polisher with Lake Country backing plate and Lake Country orange, white, black flat pads to apply these products
I applied the TSR one panel at a time and wiped it off. At high speeds the product produced quite a bit of dust.
I sprayed a bit water to reduce the dusting but it didn't helped much.
But the layer applied on to the paint was still easy to wipe off.
My pad felt a bit warm after a few panels and due to my first time using a LC backing plate I didn't realise the backing plate starting to overheat. Bits of the yellow backing plate was stating to fly off!!
When I removed the sponge from the backing plate the entire backing plate crumbled!!!
I applied the FG at medium speeds and it was also easy to work with.
Finally comes the DGPS, I applied it to half of the car, waited 40 mins before wiping off. It was easy to wipe off even after it has dried. As the DGPS needs 12 hours to fully cure, I could only do the next half of the car the next day.
The end result is very nice.
Even though it is a sealant, it shines like a wax.
The depth and gloss is worth the effort.
