#811
CoffeeDude
Posted 29 January 2013 - 09:03 AM
But that is the more accurate way to do step by step.....
If want to cut short, DG501 AIO then DG105 is 2 steps...
Yup, a ROB will do wonders....
I thought you just bought them.....
DG501 AIO then DG105 no need to wipe off in between?
I'm referring to my 3 step deep crystal meguiars
Posted 29 January 2013 - 11:58 AM
DG501 AIO then DG105 no need to wipe off in between?
I'm referring to my 3 step deep crystal meguiars
DG 501 AIO needs to be wiped off inbetween before DG105.
Or
DG 501 AIO to be wiped off and buffed. Then DG 601 PBA, apply and leave on car until haze, do not buff off the layer, then DG 105 on top of DG 601. Then allow 1.5 - 2hrs to dry then remove, then buff panel. For better bonding after apply DG601+105 let bake in the sun for 1-2 hrs. Then let car cool before removing haze ad buff panel. You will find the haze has hardened and slightly more difficult to remove.
#813
CoffeeDude
Posted 29 January 2013 - 01:36 PM
DG 501 AIO needs to be wiped off inbetween before DG105.
Or
DG 501 AIO to be wiped off and buffed. Then DG 601 PBA, apply and leave on car until haze, do not buff off the layer, then DG 105 on top of DG 601. Then allow 1.5 - 2hrs to dry then remove, then buff panel. For better bonding after apply DG601+105 let bake in the sun for 1-2 hrs. Then let car cool before removing haze ad buff panel. You will find the haze has hardened and slightly more difficult to remove.
Cool will try this method in future
#814
vr2turbo
Posted 30 January 2013 - 08:15 AM
DG 501 AIO needs to be wiped off inbetween before DG105.
Or
DG 501 AIO to be wiped off and buffed. Then DG 601 PBA, apply and leave on car until haze, do not buff off the layer, then DG 105 on top of DG 601. Then allow 1.5 - 2hrs to dry then remove, then buff panel. For better bonding after apply DG601+105 let bake in the sun for 1-2 hrs. Then let car cool before removing haze ad buff panel. You will find the haze has hardened and slightly more difficult to remove.
I am a lazy dude. DG501, no buff then DG105/601 combo together.....
#815
arch5069
Posted 01 February 2013 - 10:27 AM
DG 501 AIO needs to be wiped off inbetween before DG105.
Or
DG 501 AIO to be wiped off and buffed. Then DG 601 PBA, apply and leave on car until haze, do not buff off the layer, then DG 105 on top of DG 601. Then allow 1.5 - 2hrs to dry then remove, then buff panel. For better bonding after apply DG601+105 let bake in the sun for 1-2 hrs. Then let car cool before removing haze ad buff panel. You will find the haze has hardened and slightly more difficult to remove.
Aiya, all this while after 105 I let it on only 30 mins then buff. Will try at least 1hr next session if time permit.
#816
vr2turbo
Posted 01 February 2013 - 02:14 PM
Aiya, all this while after 105 I let it on only 30 mins then buff. Will try at least 1hr next session if time permit.
Mine see haze already, then buff off liao.....
Posted 06 February 2013 - 11:44 AM
Mine see haze already, then buff off liao.....
normally I apply the whole car ..then rest a while with a ciga.. THEN buff off from the starting point again.
cheers.... Duragloss The Wet Look
www.duragloss.com.my
facebook.com/duraglossmalaysia
#818
vr2turbo
Posted 06 February 2013 - 03:48 PM
normally I apply the whole car ..then rest a while with a ciga.. THEN buff off from the starting point again.
I don't smoke woh!....
#819
arch5069
Posted 07 February 2013 - 11:06 AM
I don't smoke woh!....
Hehe uncle. Never too old to learn. Jangan marah yang, just joking nia.
#820
vr2turbo
Posted 07 February 2013 - 03:48 PM
Hehe uncle. Never too old to learn. Jangan marah yang, just joking nia.
Unless it is part of detailing, since not, better don't....hahahahahaha