#31
swinee
Posted 03 May 2011 - 12:10 PM
JPJ only allow tint up 30% dark for the front screen, means 70% visible light and for the rest is 50%.
If the tint is already 50% then make sure the glass is nil. If glass in 10% then you can tint up to 40% only....
but no glass in this world would have "0" VLT even the 1/4" window pane in our house w/o tint ady got VLT cut of liao..
so in other words..with any 70% VLT tint u put on the ori glass...it would still fail the puspakom test..
vkool elite at myvi windscreen also failed puspakom test when i sell off my ride..but side and rear still remains can pass with Elite but only by a small margin from the printed report..hehe..
not to mentioned nowadays with UV glass liao..sure fail lo..if u selected any tint lower than 70% VLT even on side/rear
#32
vr2turbo
Posted 03 May 2011 - 05:54 PM
but no glass in this world would have "0" VLT even the 1/4" window pane in our house w/o tint ady got VLT cut of liao..
so in other words..with any 70% VLT tint u put on the ori glass...it would still fail the puspakom test..
vkool elite at myvi windscreen also failed puspakom test when i sell off my ride..but side and rear still remains can pass with Elite but only by a small margin from the printed report..hehe..
not to mentioned nowadays with UV glass liao..sure fail lo..if u selected any tint lower than 70% VLT even on side/rear
The sides allowed up to 50% that is why still can pass......
#33
clex777
Posted 14 May 2011 - 02:47 AM
but no glass in this world would have "0" VLT even the 1/4" window pane in our house w/o tint ady got VLT cut of liao..
so in other words..with any 70% VLT tint u put on the ori glass...it would still fail the puspakom test..
vkool elite at myvi windscreen also failed puspakom test when i sell off my ride..but side and rear still remains can pass with Elite but only by a small margin from the printed report..hehe..
not to mentioned nowadays with UV glass liao..sure fail lo..if u selected any tint lower than 70% VLT even on side/rear
When your tinted is fail by puspakom test and then remove the film...have you ever ask them to remeasure again after they remove the film ?
They will never want...why??????
#34
vr2turbo
Posted 14 May 2011 - 01:41 PM
Actually 30% for front is very very light only. I am using same tint all round therefore for front should fail, but so far no problems at road blocks as can see in quite easily.....
#35
Bernardo
Posted 27 July 2011 - 08:10 PM
Bernardo
Advanced
-
-
Members
-
-
73 posts
Actually 30% for front is very very light only. I am using same tint all round therefore for front should fail, but so far no problems at road blocks as can see in quite easily.....
Have anyone tried Progard ? according to the SA it is under V-Kool , just wondering is it true ? How is the film ?
#36
vr2turbo
Posted 27 July 2011 - 09:48 PM
Have anyone tried Progard ? according to the SA it is under V-Kool , just wondering is it true ? How is the film ?
Nowadays got so many. Mine is extreme cool also from V-kool......
