hi all,
i don't hear any 'beep beep' sound when i engages reverse in my Cefiro. appreciate if anyone could offer some advice (n steps) how to troubleshoot this whether is fuse or reverse sensor itself 'kong'
thanks y'all
Close
Reverse Sensor Problem
Started by
vq20
, Nov 19 2013 01:15 PM, 3 replies to this topic
#2
Posted 20 November 2013 - 03:39 PM
QUOTE (vq20 @ Nov 19 2013, 01:15 PM) <{POST_SNAPBACK}>
hi all,
i don't hear any 'beep beep' sound when i engages reverse in my Cefiro. appreciate if anyone could offer some advice (n steps) how to troubleshoot this whether is fuse or reverse sensor itself 'kong'
thanks y'all
i don't hear any 'beep beep' sound when i engages reverse in my Cefiro. appreciate if anyone could offer some advice (n steps) how to troubleshoot this whether is fuse or reverse sensor itself 'kong'
thanks y'all
I am not sure about Cefiro but last time my wira also the same problem.. i manage to locate the sensor mainboard and disconnect, open up and clean the circuit board and then plug in.. it is working again... now almost 5 years without problem.... should be at the back of the hood......... try to find...
#3
Posted 20 November 2013 - 03:48 PM
QUOTE (vq20 @ Nov 19 2013, 01:15 PM) <{POST_SNAPBACK}>
hi all,
i don't hear any 'beep beep' sound when i engages reverse in my Cefiro. appreciate if anyone could offer some advice (n steps) how to troubleshoot this whether is fuse or reverse sensor itself 'kong'
thanks y'all
i don't hear any 'beep beep' sound when i engages reverse in my Cefiro. appreciate if anyone could offer some advice (n steps) how to troubleshoot this whether is fuse or reverse sensor itself 'kong'
thanks y'all
Found something googling.... last time i did the same thing... from the speaker can track where is the sensor board...http://cefiro230.blogspot.com/2006/09/how-to-soften-cefiros-reverse-sensor.html... hope this helps
#4
Posted 20 November 2013 - 05:29 PM
QUOTE (akumaliew @ Nov 20 2013, 03:39 PM) <{POST_SNAPBACK}>
I am not sure about Cefiro but last time my wira also the same problem.. i manage to locate the sensor mainboard and disconnect, open up and clean the circuit board and then plug in.. it is working again... now almost 5 years without problem.... should be at the back of the hood......... try to find...
i shall look at it at once.. thank for the tip