Jump to content

Welcome to Autoworld Forum !

Sign In or Register to gain full access to our forums. By registering with us, you'll be able to discuss, share and private message with other members of our community.

Close
Photo

Proton Gen 2 Cuts Out When Revs Drop


  • Please log in to reply

#1
andrewmark

Posted 07 June 2013 - 01:16 AM

andrewmark

    2nd Gear

  • Members
  • 2 posts
Hi all proton gen2 mechanics, and anyone who can help,
Firstly brakes would not lock up, found problem with servo vacuum hose, (had melted due to hp side of ac pipe, running threw it!)
Replaced the hose, brakes were spot on, engine ran better than ever.........
For a week..........
Now every time the revs get low it cuts out, when its idling you can stall it just by turning steering wheel,
If anyone has any suggestions plz comment
Thanks
Andy


Please any ideas would be greatly appreciated,
Also, I had another look at we're the servo vacuum hose goes into manifold, right next to it there's what I can only describe as a 'breather' (gold pipe sucking in air, if you put you finger over it, engine goes to stall) does look like another vac opening for something but cannot see anything that should go onto it.
Again if anyone has worked with these engines any advise wouldn't go a miss